|
|
8200 and 7800
|
9200
|
|
Specifications
|
Heavy duty, BHMA certified under ANSI A156.13 Series 1000 for Grade 1. Meets ANSI A156.13 Series 1000 Operational UL listed for use on fire doors. UL listed to Canadian Safety Standards. Grade 1 (with all cylinders). Conforms to standards UL10C “Positive Pressure fire tests of door UL Standard 10B, Fire Test of Door Assemblies* assemblies” and UBC 7-2 (1997).
|
Meets ANSI A156.13 Series 1000 Operational Grade 1 (with all cylinders). Conforms to
Conforms to UL Standard 10B, Fire Test of Door Assemblies* with Signature, V-10, Mogul V-10 cylinders only.
|
|
Security Compliance
|
Certified for ANSI Security Grade 1 with all trim designs
|
Same with 8200 and 7800
|
|
Detention Compliance
|
N/A
|
ASTM F1577-95b Detention Locks for Swinging Doors, Paragraph 6.2 Level 1 Impact (deadbolt x latchbolt and deadbolt only), 6.2 Level 3 Impact for latchbolt only; Paragraph 6.6 for Mechanical Release Force (V-10 and Mogul V-10), and Paragraph 6.8 for Mechanical Release Operation Cycle. Only for 9200 lock. (V-10 and Mogul V-10)
|
|
For Doors
|
1-3/4" (44mm) thick. 1-7/8" (48mm) to 6" (152mm) thick or 1-3/4" (44mm) thick with panel one side, use 31-prefix. For 8200 and 7800 only: Can be used on 1-3/8" (35mm) thick doors (see 1-prefix below).
|
Same with 8200 and 7800
|
|
Backset
|
2-3/4" (70mm) only
|
Same with 8200 and 7800
|
|
Deadbolt
|
1" (25mm) throw. Stainless steel with two hardened steel rollers.
|
1" (25mm) throw. Stainless steel with two hardened steel inserts.
|
|
Latchbolt (Reversible)
|
3/4" (19mm) throw, one piece stainless steel with anti-friction insert.
|
Same with 8200 and 7800
|
|
Guardbolt
|
Stainless steel. Simultaneously retracts with latchbolt.
|
Same with 8200 and 7800
|
|
Armored Front
|
Brass, bronze or stainless steel 1-1/4" (32mm) x 8" (203mm). Can be adjusted at any angle from flat to beveled 1/8" (3mm) in 2" (51mm).
|
Inside front full 1/8" (3mm) hardened high carbon steel.
|
|
Case
|
Heavy 12 gauge wrought steel with zinc dichromate finish for corrosion resistance.
|
Same with 8200 and 7800
|
|
Strike
|
Brass, bronze or stainless steel. ANSI Standard A115.1, curved lip, non-handed.
|
Same with 8200 and 7800
|
|
Keys
|
Two, nickel silver material, furnished standard with each factory masterkeyed lockset.
|
Same with 8200 and 7800
|
|
Cylinders
|
Brass, 6 pin standard. Signature, Keso, V-10, construction, removable and interchangeable core available.
|
Also available in V-10 mogul cylinder.
|
|
Hand
|
Lock body is handed and can be field reversed without opening the lock case.
|
Same with 8200 and 7800
|
|
Thumb Turn
|
Brass, bronze or stainless steel, #130KB standard with 8200 Line. #130W standard with 7800 Line. Other styles available.
|
Same with 8200 and 7800
|
|
Finishes
|
3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D. LS and KS trims are not available in 10BL, 20D, 32, 32D.
|
4, 26D, 32D
|
|
Milling (levers) or Knurling (knobs)
|
Machined hazard warnings on levers and knobs for the visually impaired.
|
Same with 8200 and 7800
|
