Mortise 8300 8400 Narrow CVR 8500 Narrow Rim Concealed Vertical Rod MD8600 & WD8600 Surface Vertical Rod 8700 Rim 8800   Mortise 8900   Specifications BHMA certified ANSI A156.3 Grade 1 Heavy duty exterior and interior applications 12-8300, 12-MD8400, 12-MD8600, 12-WD8600, 12-8700, 12-8800 and 12-8900 are UL and UL listed to Canadian Safety Standards Rail, pushbar, and chassis cover are heavy wrought stainless steel, brass, or bronze Maximum 3" (76mm) projection, min. 2-1/8" (54mm) High impact resistant Lexan touchpad on pushbar standard or may be omitted using 19-prefix (Lexan is a registered trademark of GE) Pushbar travels in direction of door swing Chassis body and parts are heavy cast non-ferrous alloy Chassis and rail are separate units allowing for ease of installation and maintenance Springs are stainless steel Simple lever action eliminates complex linkage of parts O/S trim is thru-bolted. Does not require removal of chassis from door to install or remove Electrical functions available Latchbolt on 8500 and 8800 Series is stainless steel, 3/4" (19mm) throw Options 12- UL listed (except 8400 and 8500 Series) and UL listed to Canadian Safety Standards for fire exit hardware 14- Sliding bolt bottom case (8700 Series) 16- Cylinder dogging (cannot be used with 12 prefix) 19- Omit Lexan touchpad on pushbar TB Thru bolts for device (suffix) HC- Meets windload requirements for 8700 & 8800 Series (must be used with CURRIES & McKINNEY products). Meets ASTM E 330 & Dade County, Florida, windload protocol. Available Functions For 80 Series 04: Key Retracts Latchbolt 10: No outside operation. Dummy trim available. 15: No cylinder. Trim always operable. 28: Similar to 63 function with no outside cylinder. Thumbpiece always operable. 63: Key locks or unlocks thumbpiece. 43: Key engages or disengages. 46: Operates only when key is in cylinder and turned. Key engages lever to retract latchbolt. 70: Key retracts latchbolt. Power off, unlocks thumbpiece. 73: Power off, unlocks lever. 75: Power off, unlocks lever. Key outside retracts latchbolt. 06: Operates only when key is in cylinder and turned. Lever or knob retracts latchbolt. 13: Key locks or unloacks knob, lever or auxiliary control. 16: Key outside retracts latchbolt. Key inside locks or unlocks lever. Freewheeling lever. 62: Thumbpiece is operative only when key is in cylinder and turned. 40: No outside operation. Lever rotates. 44: Key retracts latchbolt. Lever rotates. 66: Key outside retracts latchbolt. Key inside locks or unlocks thumbpiece. 71: Key retracts latchbolt. Power off, locks thumbpiece. 74: Power off, locks lever. 76: Power off, locks lever. Key outside retracts latchbolt. Available Outside Trim For 80 Series ET O/S Trim PTB O/S Trim STS O/S Trim MAL O/S Trim FLL O/S Trim FLW O/S Trim Pulls 1" dia. x 10" 1" dia. x 18" 3/4" dia. x 10" Auxiliary Control Home | About Us | Products | Services | Consulting | Locations | Links | Contact Us Powered by FastNet Copyright © 2003 General Supply Company. All Rights Reserved. Reuse of any of the contents on this website is prohibited without the expressed, written permission of General Supply Company. We are not affiliated with any other company or organization trading by the same name.