Electrified Exit Devices Electrified ET Lever Handle Controls Provides remote means of locking or unlocking a door for authorized entry, access control, security or safety needs when used in conjunction with an 80 Series exit device. 773 - For 73 function device, no cylinder override 774 - For 74 function device, no cylinder override 775 - For 75 function device, cylinder override 776 - For 76 function device, cylinder override Prefix 54 - Signal switch in trim. Electrified 80 & 12-80 Series Prefix 12 - UL listed for fire exit hardware Prefix 55 - Signal switch in rail. Signal switch monitors the touch bar. Touch bar monitoring may be used to detect egress. The switch option is UL listed for panic and fire. Used to signal a remote location when rail is depressed, authorized egress, door control or door status systems. Prefix 56 - Remote dogging/latch retraction. Exit device may be locked or unlocked from a remote location while simultaneously dogging (unlocking) or undogging (locking) the push rail (.45 amp operating current). Prefix 57 - Delayed egress with magnet (ordered separately). Sounds a horn at the door indicating a violation is about to occur. Once actuated, the 80 Series exit will signal the electromagnetic lock, keeping the door closed for 15 seconds. This time delay allows time to respond to a pending violation. Prefix 58 - Electric dogging. When the exit device is energized and the push rail is depressed, the push rail is held down and the latchbolt will be in an unlocked position. When power is interrupted, the rail releases and the latchbolt will extend (.20 amp operating current). Prefix AL - Alarmed exit – 9V battery operated. Designed for areas requiring a stand-alone alarm on outward swinging doors. Alarm inside the rails sounds immediately upon exit. Ideal for rear exterior doors or doors leading to a rooftop, or anywhere security is a concern. Alarmed Exit Hardware 540/550 Series - stand alone exit alarm 5100 Series - UL listed for exit lock (push paddle device) 5800 Series - UL listed for panic hardware 12-5800 Series - UL listed for fire exit hardware; 9V battery operated and I/S cylinder standard for all Options: O/S cylinders and trim; remote power (91 prefix); remote monitoring (92 prefix); continuous alarm (93 prefix); auto re-arming (94 prefix). Electroguard® for 80 Series Prefix 59 Electroguard delayed egress system. Designed for all 80 Series exit devices which require a delay on egress (rim, mortise, and surface and concealed vertical rods). All locking contained within the rail assembly of the exit device for delayed action feature 3 Modes of egress — delayed, momentary, and maintained Connects to fire alarm system with fire alarm contact Internal latchbolt monitoring of device Separate output from the Electroguard provides an indication to a remote monitoring panel when the latchbolt is retracted or extended Power supplied through a concealed circuit hinge Field adjustable nuisance delay can be either 0 or 2 seconds 80 Decibel horn in rail assembly Red, yellow, and green LEDs indicate status Operating requirements — 200mA unloaded, 500mA loaded. Requires 24 VDC regulated/filtered Conforms to NFPA 101 special locking arrangements Available for panic and fire rated devices Meets ANSI/BHMA A156.3 Grade 1 for exit devices Several options are available to be integrated with the Electroguard: fire alarm, remote alarm, door position, external inhibit input, voice output, latchbolt status, and gang release (unlock one and all locks are released). BC prefix available to conform to BOCA requirements Home | About Us | Products | Services | Consulting | Locations | Links | Contact Us Powered by FastNet Copyright © 2003 General Supply Company. All Rights Reserved. Reuse of any of the contents on this website is prohibited without the expressed, written permission of General Supply Company. We are not affiliated with any other company or organization trading by the same name.