Monitoring Controls 4 & 8 Zone Remote Monitoring Consoles Designed to control and monitor 4 zones or 8 zones through a toggle switch. Consoles include wall mount junction box clearly marked to provide connecting points via screw terminals. Supplied with 10 foot interconnect cable with 37 pin Sub D connector. 24 VDC power requirement (3510/3560). For eight zones, 3560 required. Monitor lights: Red: Violation – unlocked Green: Secure – locked Relay output: Form “C”. 5 amp @ 24 VDC. Current draw: 320mA-4414 console, 635mA-4418 console. Audible signal indicates violation. Dimensions: 4414-4 Zone – 8" L x 6" D x 4" H; 4418-8 Zone – 12" L x 6" D x 4" H. Dimensions: Junction Box 12" L x 12" W x 4" D. Maintained toggle at each zone to control load. Monitoring Accessories Door Status Switches 3285 - Surface applied. Used with 5100, 5800, and 12-5800 alarmed devices 3287 - UL listed SPDT concealed switch .250 amp @ 24 VDC. Used with 4414/4418. Horn 4380H Used to signal a remote location. dB rating 85dB. Horn input voltage 6-28 VDC @ 3-14mA. Available with LEDs (4380HL). Monitor Strike 881 - May be used in place of surface mounted strike for 5800, 12-5800, 8500, 8700, 8800, 12-8800 exit devices. SPDT switch to signal remote location. Monitors latchbolt status. Used with 4414 and 4418 consoles. UL listed. For single door application alarms. Material: Ductile iron; Finish: Black nylon coated; Switch Rating 2 amps @ 24 VDC, 3 amps @ 125 VAC. 3287 Door Status Switch® Voice Module — ADA 3071/3072 - can be tied into Electroguard, providing a standard message. Other custom messages available. Voice module provides communication for visually impaired. Requires junction box 52-0070 or 52-0071. Magnetic Door Holders 1504 - (Field selectable 24 VAC/DC and 120 VAC) UL listed for use with self-closing fire and smoke barrier doors and detection equipment. Fail-safe device. Power off releases hold open. Flush or surface wall applications. 1516 - Single Floor Mount 1517 Double Floor Mount Power Supplies 3263 - Can be used with all alarmed exit hardware and prefixes 91-, 92-, 93-, 94-, AL-. 9 VDC (1.5 amps). 3510 - Regulated and filtered 24 VDC (1.8 amp) output. Will power two 56- or 57- exit devices or 6 solenoid locks at .25 amp. UL listed for Class II applications. 3530 - Series Regulated and filtered 24 VDC (2 amp) output. DPDT relay standard for fire alarm tiein or auxiliary output relay. Available battery backup and timer delay (0 to 60 sec.). 3560 - Regulated and filtered 24 VDC (7.2 amp) 3267 - Power supply transformer 9 VDC with battery backup option. Requires 3 proxy outlet. Home | About Us | Products | Services | Consulting | Locations | Links | Contact Us Powered by FastNet Copyright © 2003 General Supply Company. All Rights Reserved. Reuse of any of the contents on this website is prohibited without the expressed, written permission of General Supply Company. We are not affiliated with any other company or organization trading by the same name.