Concealed Circuit Suffix CC-4, CC-6, CC-8 Regardless of door position, McKINNEY type CC electric hinges permit passage of a constant flow of current from jamb to door for a diversity of control functions. Uses include operation of electric locks, door closers, and other devices requiring power to the door One amp capacity — low voltage, 12 or 24 VDC per circuit Full mortise sizes: 4-1/2" x 4" (114 x 102), 4-1/2" x 4-1/2" (114 x 114), 5" x 4-1/2" (127 x 114), 5" x 5" (127 x 127) standard and heavy weight, brass, bronze, steel, and stainless steel Four, six, or eight wires available on steel, brass, or bronze (standard weight and heavy weight) Four, six, or eight wires available on heavy weight stainless (standard weight stainless four-wire only) Available with most two, three, and five knuckle bearing hinges 28 gauge wire Wires are contained within the hinge — invisible and tamperproof Available with one exposed switch in two knuckle hinges or one, two, or three exposed switches in three and five knuckle hinges Example of ordering: 4-1/2" x 4-1/2" (114 x 114) TA2714-26D x CC 4 wires Hinges are supplied with 12" (305) leads as standard. Extra lengths are available at additional cost NOTE: Two knuckle style is handed. If hinge is combined with CS option or anchor hinge, it becomes handed. Concealed Switch Suffix CS CS electric hinges are equipped with make before break switches which can be used to signal open or closed door position. Switch is not visible when hinge is installed Designed for a variety of operational and signaling functions which do not require power in the door For low voltage (48 volt max.) .25 amp AC or DC non-inductive load Full mortise sizes: 4-1/2" x 4" (114 x 102), 4-1/2" x 4-1/2" (114 x 114), 5" x 4-1/2" (127 x 114), 5" x 5" (127 x 127) brass, bronze, and steel All sizes can be furnished with one switch on two knuckle hinges and one or two switches on three and five knuckle hinges Available with most full mortise standard and heavy weight bearing hinges Material — steel, brass or bronze Hand of hinge must be specified Available in combinations with one concealed switch and two or four wires in concealed circuits Example of ordering: 4-1/2" x 4" (114 x 102) TA714-26D x CS x RH (Right Hand) Hinges are supplied with 12" (305) leads as standard. Extra lengths are available at additional cost Magnetic Monitoring Hinge Suffix MM Features a magnetic reed concealed switch Offers simplicity and dependability Defies detection Patented Neither switch nor operating magnet are attached to hinge Non-attachment feature reduces chance of damage during installation Switch is easily adjustable Switch is readily accessible for inspection and adjustability Available with most full mortise bearing hinges Switch is UL listed at: 6V/.25 amp, 12V/.25 amp. 24V/.125 amp, 48V/.062 amp Switch operation is in excess of 1-1/2 million cycles Switch is sealed, making it impervious to dirt and moisture This system is the only one on the market that permits field replacement Available in two knuckle, three knuckle, five knuckle, and 1502 series Narrow stile switch and wide gap magnet available Hinges are supplied with 12" (305) leads as standard. Extra lengths are available at additional cost Home | About Us | Products | Services | Consulting | Locations | Links | Contact Us Powered by FastNet Copyright © 2003 General Supply Company. All Rights Reserved. Reuse of any of the contents on this website is prohibited without the expressed, written permission of General Supply Company. We are not affiliated with any other company or organization trading by the same name.