Hollow Metal Doors Composite CURRIES offers a complete line of composite type hollow metal doors in face sheet gauges ranging from 20 to 14. All CURRIES 607 and 707 Series doors are insulated as standard with fully bonded, durable polystyrene cores. The 727 Series Temperature Rise doors offer the maximum in fire and life safety as they feature either 250°F (121°C) or 450°F (232°C) ratings. Fire ratings are available from 20 minutes through 3 hours. CURRIES composite type doors have been tested to outperform all test criteria available for physical endurance. The combined durability and economy of these doors make them a popular choice for a variety of uses. Steel-Stiffened CURRIES steel-stiffened doors are designed with the combination of perimeter steel channels and core stiffeners to offer the industry’s largest selection and most reliable and durable construction. They are used in areas where optimum security and susceptibility to vandalism or break-in are of paramount concern. Face sheets are available in gauges from 18 to 14, with door thicknesses of both 1 3/4" (44) and 2" (51). CURRIES 747, 847, and 857 Series doors offer a range of products suited for commercial security uses. Hollow Metal Frames Masonry/Drywall Knock-down masonry, drywall, and multi-use frames are available from CURRIES in series, profiles, face dimensions, gauges, and door opening sizes to fit most any need in the construction industry today. In addition, CURRIES and its distributors can modify and weld frames to expand the variety of frames available even further. CCW Frame Components Frame components used in the building of window walls, borrowed lites, transom frames, sidelites, and other custom configurations are available in an almost limitless array, allowing total design freedom in developing aesthetically pleasing, functional units as required by the demands of today’s architecture. CURRIES’ capabilities in this area go well beyond the abilities of most hollow metal manufacturers. Factory Finished Doors & Frames Factory finished doors and frames are degreased, cleaned, phosphatized, primed, and finished with one coat of baked-on silicone alkyd enamel paint. Finished paint shall have a dry film thickness of 1.0 mil meeting ASTM D1186. Pre-finished over-the-wall drywall frames are individually packed in cardboard cartons and marked for the opening. Doors are bagged and cardboarded. Home | About Us | Products | Services | Consulting | Locations | Links | Contact Us Powered by FastNet Copyright © 2003 General Supply Company. All Rights Reserved. Reuse of any of the contents on this website is prohibited without the expressed, written permission of General Supply Company. We are not affiliated with any other company or organization trading by the same name.